Category Archives: heat sink design

How to Select a Heat Sink: An ATS On-Demand Thermal Management Webinar

Posted on August 29, 2011 by | Leave a comment

Our webinar “Heat Sink Selection Made Easy” is easily one of our most watched in our webinar archives. It a little over an hour, but, by the end, viewers will have a firm grasp of how to properly select a heat sink based on the fundamentals of thermal engineering. Its a must see for new engineers getting up to speed on thermal management of electronics and for experienced engineers looking to refresh their understanding.

Leave a comment

Posted in heat sink, heat sink design, Heat Spreaders, Thermal Analysis, Webinar

How To Place the ATS Candlestick Sensor For Thermal Analysis

Posted on June 30, 2011 by | Leave a comment

ATS’s Candlestick Sensor is our best selling sensor to collect air temperature and air velocity in thermal analysis. Like all of our thermal engineering instruments, ATS developed our Candlestick sensor out of necessity: we were simply breaking too many standard sensors and needed a more robust and accurate sensor. And the Candlestick Sensor was born!

Many of our customers often ask how our thermal engineers place the Candlestick Sensor in a wind tunnel in order to analyze a heat sink or other device. In this one minute video, Greg shows you just how we do it.

Leave a comment

Posted in heat sink design, Thermal Analysis, thermal engineering, Thermal Research

Tagged , , ,

Thousands of Heat Sinks Make Your Next Design Quick, Cheap and Effective

Posted on June 14, 2011 by | 1 comment

Our team has literally seen thousands of applications for heat sinks. Check out the articles here on our blog or in our Thermal eJournal, Qpedia, and you’ll see even more evidence of this.

So what does this mean to you and your new thermal management project?

It means that our library of usable designs is at your disposal. It’s highly likely we’ve seen your particular thermal challenge before and that we already have a solution we can apply to your design point.

Reusing a design or modifying an existing design means your solution is less expensive than doing it on your own and quicker to deploy. Which means you’ll meet your project schedule and ship  revenue producing units faster than you would otherwise.

Give us a call at 781-769-2800 or email us at ats-hq@qats.com or use our heat sink request tool to submit your heat sink design on-line and let us help you ship your production faster and in budget.

heat sinks designed for engineering reuse

1 Comment

Posted in heat sink design, Heat Sinks, thermal management

Free ATS Webinar: How to Properly Measure Temperature within Electronic Systems and Analyze the Results

Posted on April 19, 2011 by | Leave a comment

On Thursday, April 28, 2011 2:00 PM – 3:00 PM EDT, ATS will be holding a free webinar, “How to Properly Measure Temperature within Electronic Systems and Analyze the Results”

Attendees will become familiar with the importance of temperature measurement in electronic systems. They will learn about the essential instruments and the locations within a system where testing should be conducted.  The webinar presenter will also discuss how to analyze the temperature data as part of a complete thermal analysis.

To register, click to our registration site at this link: https://www2.gotomeeting.com/register/952923650

For the Chinese Mandarin presentation of our webinar please register at http://bit.ly/ATS_temp_mesaurement_Mandarin

 

Leave a comment

Posted in heat sink design, Thermal Analysis, Thermal Design, thermal management, Thermal Research, Thermal Science

Tagged , , , ,