Check Stock & Buy Now Download Instructional Manual Download Software and Calibration File Data Sheet Frequently Asked Questions ? Download Portal iQx-100™ Measure Temperature, Velocity, Pressure & Humidity with a Single Instrument The iQx-100 eliminates the need for multiple instruments to collect and synchronize different air measurements. With connected sensors, the iQx-100 collects air data around and across circuit cards and assemblies, pitot tubes, orifice plates, Venturi tubes and other hardware for thermal management studies. The instrument is supplied with 8 velocity sensors, 2 differential air pressure sensors, 4 J-type thermocouples, and a humidity sensor. Collected data is managed by the instrument’s iSTAGE-X program, the unique LabVIEW-based operating software. With the single instrument and software, there are no data collection errors from measurement time lapses or transience that can occur using multiple systems. The benchtop iQx-100 connects to a PC via USB for data transfer. Product Specifications OVERALL DIMENSIONS (D x W x H): 33.9 x 43.2 x 12.6 cm (13.3 x 17 x 5 inch) NUMBER OF VELOCITY CHANNELS: 8 FLOW RANGE: Standard: 0 to 6 m/s (0 to 1,200 ft/min) High Velocity: 0 to 50 m/s (0 to 10,000 ft/min) NUMBER OF THERMOCOUPLES: 4 (J type) NUMBER OF PRESSURE SENSORS: 2 (Differential) PRESSURE RANGE: 0 to 1.03 kPa (0 to 0.15 psi) HUMIDITY SENSOR: 1 humidity sensor to measure relative humidity with +/- 2% at 55% RH SOFTWARE iSTAGE-X™ VOLTAGE INPUT: 115V or 240VAC WEIGHT: 3.2Lb CONNECTION: USB Port Applications Heat Sink Design & Selection PCB Characterization Card Rack Characterization (ATCA, PICMG, 1U, etc.) Qualification Testing in the Environmental Chamber (NEBS, Milspec, etc.) Mockup Testing Wind Tunnel Testing of Cards, Heat Sinks, Components, etc. Additional Features Simultaneous or Individual Temperature, Velocity & Pressure Measurement Saves Time & Lab Space Unique iSTAGE-X™ Software Compact, Portable & Versatile 4 Thermocouple ports (j type) for Temperature Measurement 8 Sensor ports for Velocity Measurement (sensors not included; please see sensor comparison datasheet or the sensor family web pages to choose sensors) 4 Ports for Pressure Measurement 1 Humidity Sensor Product and How To Videos The multiple capabilities of the iQx Thermal Measurement System The families of ATS thermal test instruments for the electronics industry. Instrument Product Family HP-97™ Power module for simulating heat-dissipating components ATVS-NxT™ Hot wire anemometer with touch screen PC & up to 32 channels for measuring temperature & velocity ATVS-2020™ Hot wire anemometer with up to 32 channels for measuring temperature & velocity eATVS-8™ Hot wire anemometer with 4 or 8 channels for measuring temperature & velocity HFC-100™ A system for controlling and measuring heat flux up to 1,000 w/cm2 ISD™ Analog hot wire anemometer board for measuring temperature and velocity tvLYT™ High-resolution liquid crystal thermography system for cost-effective temperature measurement PTM-1000™ A transducer for measuring static & differential pressure with 4 to 8 channels CIP-1000™ A controllable isothermal plate system for components & PCB testing TLC-100™ Thermochromic liquid crystal kit for heat mapping studies FCM-100™ Fan characterization module for generating PQ curve for a single fan or fan tray thermVIEW™ High-resolution thermography system with precise temperature accuracy iQ-200™ A single system for A single system for measuring temperature. velocity & pressure measuring temperature. velocity & pressure iFLOW-200™ An automatic system for cold plate characterization DAC-200™ Instrument for outputting analog voltage linearly proportional to air velocity and temperature. FSC-200™ Fan speed controller for automation of thermal testing Portable Anemometer Portable vane anemometer for measuring air flow speed & volumetric flow rate iQx-100™ A single system for measuring temperature velocity, pressure & humidity Closed Loop Wind Tunnels Thermally characterize components, boards and heat sinks undera range of air flows and temperature. Open Loop Wind Tunnels Thermally characterize components, boards and heat sinks undera range of air flows.
