Get Mechanical Drawing *Image above is for illustration purpose only.. ATS-CP-1001-DIY Cold Plates ATS Part#: ATS-CP-1001-DIY Description: Finned Cold Plate Base Material: Aluminum 6061 & 6063 (Unfinished) Installation Guide:Download PDF Thermal Performance:See detail Mechanical Drawing:See detail Links: The DIY (“Do It Yourself”) family of high-performance cold plates provides engineers with the freedom to drill holes to match the specific connection points of the devices being cooled such as IGBT, MOSFET, or other power electronics. Each cold plate has an etched “no drill zone” to provide a visual guide. Outside of the “no drill zone,” through holes can be drilled at any point. (Avoid drilling into the I/O ports.) Inside the “no drill zone” holes can only be drilled to a depth of 6 mm to avoid damaging the internal fin field. (See explanatory graphic below). All ATS standard IGBT cold plates have unmatched thermal performance because of their mini-channel fin design. The ATS-CP-1001-DIY has the same thermal performance as the ATS-CP-1001., at a flow rate of 4 L/min, can transfer 1kW of heat at 5°C temperature difference between the cold plate base and inlet fluid temperature. If the coolant has particles, a #60 filter or finer is recommended to remove possible particles in the liquid. Customization is available. ATS can design cold plates to meet size restrictions and manufacture cold plates to connect with a variety of components include Semikron SemiTRANS® Infineon EconoDUAL™3 Fuji Semiconductor Spring Contact Module Powerex NX™ Series Other IGBTs or high Power devices FEATURES AND BENEFITS Dimensions in mm (L x W x H): 198 x 147 x 20 Material: Aluminum 6061 & 6063 (Unfinished) Weight: 1,340 grams More than 30% improvement in thermal performance compared to commercially-available cold plates Compatible with industry accepted coolants 1/4 (pipe size) – 18 (thread density) NPT threaded inlet and outlet ports Low pressure drop characteristics Lightweight for ease of use Provides uniform cold plate surface temperature when IGBTs are installed Maximum Pressure: 60 psi Customizable to fit different devices Product Details Part Number Lifecycle Status Plate Dimension (mm) Weight (g) Thermal Base on 1kW & Flow Rate of 4 L / min Material Length Width Height ATS-CP-1001-DIY ACTIVE 198.0 147.0 20.0 1,340 0.0053 Aluminum 6061 & 6063 (Unfinished) Application Notes Thermal Performance Technical & Mechanical Data Thermal Performance Schematic Image Thermal Resistance Flow Rate LPM(GPM) R (°C/W) dP kPA (psi) *Image above is for illustration purpose only. 0.75 (0.2) 0.013 0.69 (0.10) 1.9 (0.5) 0.007 2.41 (0.35) 3.8 (1.0) 0.0053 6.07 (0.88) 5.7 (2.5) 0.0044 15.17 (2.20) ATS-CP-1001-DIY (Data Sheet) ATS-CP-1001-DIY Mechanical Drawing - FUSED MODEL (used for Form and Fit use) RoHS & REACH Certificate Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks Fused Model Check Stock & Buy Now Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? View Similar ATS-CP-1002 ATS-CP-1001-DIY
Get Mechanical Drawing *Image above is for illustration purpose only.. ATS-CP-1001-DIY Cold Plates ATS Part#: ATS-CP-1001-DIY Description: Finned Cold Plate Base Material: Aluminum 6061 & 6063 (Unfinished) Installation Guide:Download PDF Thermal Performance:See detail Mechanical Drawing:See detail Links: The DIY (“Do It Yourself”) family of high-performance cold plates provides engineers with the freedom to drill holes to match the specific connection points of the devices being cooled such as IGBT, MOSFET, or other power electronics. Each cold plate has an etched “no drill zone” to provide a visual guide. Outside of the “no drill zone,” through holes can be drilled at any point. (Avoid drilling into the I/O ports.) Inside the “no drill zone” holes can only be drilled to a depth of 6 mm to avoid damaging the internal fin field. (See explanatory graphic below). All ATS standard IGBT cold plates have unmatched thermal performance because of their mini-channel fin design. The ATS-CP-1001-DIY has the same thermal performance as the ATS-CP-1001., at a flow rate of 4 L/min, can transfer 1kW of heat at 5°C temperature difference between the cold plate base and inlet fluid temperature. If the coolant has particles, a #60 filter or finer is recommended to remove possible particles in the liquid. Customization is available. ATS can design cold plates to meet size restrictions and manufacture cold plates to connect with a variety of components include Semikron SemiTRANS® Infineon EconoDUAL™3 Fuji Semiconductor Spring Contact Module Powerex NX™ Series Other IGBTs or high Power devices FEATURES AND BENEFITS Dimensions in mm (L x W x H): 198 x 147 x 20 Material: Aluminum 6061 & 6063 (Unfinished) Weight: 1,340 grams More than 30% improvement in thermal performance compared to commercially-available cold plates Compatible with industry accepted coolants 1/4 (pipe size) – 18 (thread density) NPT threaded inlet and outlet ports Low pressure drop characteristics Lightweight for ease of use Provides uniform cold plate surface temperature when IGBTs are installed Maximum Pressure: 60 psi Customizable to fit different devices Product Details Part Number Lifecycle Status Plate Dimension (mm) Weight (g) Thermal Base on 1kW & Flow Rate of 4 L / min Material Length Width Height ATS-CP-1001-DIY ACTIVE 198.0 147.0 20.0 1,340 0.0053 Aluminum 6061 & 6063 (Unfinished) Application Notes Thermal Performance Technical & Mechanical Data Thermal Performance Schematic Image Thermal Resistance Flow Rate LPM(GPM) R (°C/W) dP kPA (psi) *Image above is for illustration purpose only. 0.75 (0.2) 0.013 0.69 (0.10) 1.9 (0.5) 0.007 2.41 (0.35) 3.8 (1.0) 0.0053 6.07 (0.88) 5.7 (2.5) 0.0044 15.17 (2.20) ATS-CP-1001-DIY (Data Sheet) ATS-CP-1001-DIY Mechanical Drawing - FUSED MODEL (used for Form and Fit use) RoHS & REACH Certificate Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks
Fused Model Check Stock & Buy Now Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? View Similar ATS-CP-1002 ATS-CP-1001-DIY
