DIY Cold Plates give engineers a tool for cold plate design to fully customize the fit of the cold plate with their target heat source. Whether that heat source is an IGBT, MOSFET, Wide Band Gap devices or other high heat device. ATS can manufacture in small or large volume once the applications mounting pattern is determined.
On the outside of the “no drill zone,” through holes can be drilled at any point. (Avoid drilling into the I/O ports.) Inside the “no drill zone” holes can only be drilled to a depth of 6 mm or 7mm to avoid damaging the internal fin field. (See drawings on individual product pages for depths.)
ATS IGBT cold plates have unmatched thermal performance because of their mini-channel fin design.
The ATS-CP-1009-DIY cold plate, can transfer 1kW of heat at 24.7 °C temperature difference between the cold plate base and inlet fluid temperature. If the coolant has particles, a #60 filter or finer is recommended to remove possible particles in the liquid.
Customization is available. ATS can design cold plates to meet size restrictions and manufacture cold plates to connect with a variety of components include FEATURES AND BENEFITS
- Dimensions in mm (L x W X H ): 87 x 115 x 20
- Material: Aluminum
- Thickness : 20 mm
- More than 30% improvement in thermal performance compared to commercially-available cold plates
- Compatible with industry accepted coolants
- 1/4 (pipe size) – 18 (thread density) NPT threaded inlet and outlet ports
- Low pressure drop characteristics
- Lightweight for ease of use
- Provides uniform cold plate surface temperature when IGBTs are installed
- Maximum Pressure: 60 psi
- Customizable to fit different devices